Screen Printing Supplies
Chemicals
Degreaser Concentrate liquid to be diluted 1:20 with water for the removal of contamination on screens.
$35.00
Concentrated crystals to be dissolved 1:20 to 1:30 in water and intended for fast removal of emulsions
$75.00
Emulsion Remover Concentrate to be diluted 1:20 with water for fast removal of emulsions
$55.00
Cured ink remover
$73.00
- Opens dried-up areas on screens
- Compatible with all types of screen printing inks
- Regular use helps to prevent clogging and work delays
- Guaranteed to leave no film
$16.00
Powerful, odourless ink degrader for textile screen-printing inks.
$73.00
All-purpose ink degrader for UV, epoxy, plastisol, conventional, and solvent-based inks.
$73.00
For the removal of haze and ghost images caused by UV, epoxy, plastisols, stencil, conventional and solvent-based ink residues.
$40.00
For the removal of the heaviest haze and ghost images caused by UV, epoxy, plastisol, stencil, conventional, and solvent-based ink residues.
$45.00
Chemical resistant scrub brush with permanent handle
$5.00
Concentrated, citrus-scented ink degrader. Especially effective on plastisol screen printing inks. Can be diluted with up to 50% water.
$73.00
- Ready to use haze remover paste
- Strong yet gentle on mesh
- Smooth gel spreads easily
- Stable formula does not separate or darken
- Will not separate in can when used with wet brush
$145.00
Emulsion
Garment printing with plastisol ink. The Durable And Fast Garment Emulsion
Characteristics
- Red pure photopolymer direct emulsion resistant to plastisol ink, abrasion and humidity
- Exposes 8x faster than a diazo or dual-cure emulsion
Features/Benefits
- 42% solids content and medium viscosity for easy coating and good bridging on wide range of mesh counts
- No mixing required and no diazo staining
- Water resistant when post exposed
$44.00
General industrial and display graphics, compact disc, half-tone printing. Our most versatile emulsion.
Characteristics
- Dual-cure direct emulsion for printing UV-cured, plastisol, solvent-based and water-based inks
- Excellent print definition on any mesh
- 39% solids content
Features/Benefits
- Low friction stencil surface prints fine details cleanly and improves durability when used with abrasive inks
$44.00
This small, super accurate calculator film positive will revolutionize your exposure testing process.
Characteristics
- Determines the exact level of exposure
- Takes up minimal space on the screen, and can be blocked out on final production screens
- Can be used on any stencil type or mesh count
Features & Benefits
- Provided exposure guide helps you determine the correct exposure level with only ONE TEST
$35.00
Screen filler (Blockout) for use with solvent-based or plastisol ink. Most popular and economical blockout.
Characteristics
- Red, medium viscosity, liquid screen filler
- Smooth & creamy consistency
- Water based and solvent resistant
- Optimal transparency
Features/Benefits
- Fully solvent resistant and offers increased durability
- Spreads uniformly and evenly for optimal drying and filling
- Does not contain solvents and can be simply removed with water
$48.00
Adhesive
Holds garments securely on pallet, or belt, during printing.
CHARACTERISTICS
- Water-based pressure-sensitive adhesive
- Superior tack level holds fleece & tees
- Flash safe & non-staining
- Non-flammable & no VOC’s
- NPEO & APEO-free
- Resists breakdown when printing with water based or discharge inks
- Can be thinned with water up to 1:1
$86.00
SaatiChem Premium Mist applies more adhesive solids for obtaining a strong bond using less adhesive. It is great in applications where a light mist adhesive does not provide enough tack. SaatiChem Premium Adhesive is heat stable, water resistant, presents a fast tack and will not wrinkle most porous surfaces or fabrics.
$13.50
SaatiChem Dri Web Spray Adhesive is a special purpose adhesive spray designed for tacking textiles to the pallet during screen printing. The unique webbing spray pattern dries quickly providing a long-lasting tack that will not transfer onto the screen printed garment. Unlike mist adhesive sprays, Dri-Web will not lose its tack when printing on fleece or other materials that may leave a coating over the adhesive. Dri-Web will not stain or sock through frabrics.
$15.50
Premium Flash Adhesive is a unique mist adhesive spray that is activated by the heat produced by flash cure units. Unlike other adhesive sprays which either lose their tack or become “gummy” from a flash, Premium Flash Adhesive is made to be flashed! With each flash, the tack of Premium Flash Adhesive increases. Ideal for high speed automatic presses with multiple flashes. Increase the number of turns before reapplication with Premium Flash Adhesive.
- Stable at High Temperatures
- Less Frequent Re-application
- Will not Transfer
- Maintains Tack with Multiple Flashes
$14.50
Tape
- Blue areas do not contain adhesive allowing Split Tape to peel cleanly without leaving residue, tearing, or damaging your emulsion.
- For masking the inside of rigid aluminum, roller, and wood frames.
$17.00
Pallet Protek is a standard weight saturated smooth paper tape with heat resistant adhesive. Cleaning up messy spray adhesive from your pallet is time consuming and costly. It’s also unnecessary. By covering your pallet with Pallet Protek™ and spraying the paper tape instead of the pallet, press clean up time is simply a matter of removing and discarding the tape. The whole process is fast and easy.
FEATURES
Smooth paper tape
- Heat resistant rubber adhesive
BENEFITS
- Save time and money
- Reduce clean up time
- Fast curing
$154.00
A blue solvent-resistant, polymer tape that is backed with mylar plastic and used mainly as a blockout tape. Magi-Blue Tape will not leave an adhesive residue when removed from the screen. It is resistant to all solvents, alcohols and acids.
$14.00
Scoop Coaters
- Convenient to use
- Large emulsion reservoir
- Angled plastic end caps (replaceable)
- One piece aluminum alloy construction
- Opaque emulsion cover
- Custom sizes available
Suggested Sizes:
- 20"x24" Screen - 16" Scoop Coater
- 23"x31" Screen - 18" Scoop Coater
- 25"x36" Screen - 20" Scoop Coater
$4.00
Squeegees
- Excellent squeegee for textile and plastisol printing
- Cut edge
- 2"x3/8"
$1.06
Select the blade durometer and use the quantity to select the length of the squeegee in inches.
- Quality 5" wooden handle,
- Premium Saati cut edge blade
- Choice of squeegee blade
- 2"x3/8" blade
$2.92
Duralife Cut Edge squeegees are engineered to have great production performance in order to meet specific demands of the global screen printing industry.
Thanks to our exclusive polyurethane formulation, Duralife CE squeegee are resistant to both chemicals and abrasion making them suitable for all applications.
FEATURES
• Extremely solvent resistant with low swelling
• UV ink resistant
• Good abrasion resistance
• Not affected by humidity
• Good re-sharpening
• Resists nicking
• Great all around performance
TRIPLE RANGE:
Duralife CE Triple is a line of squeegees made out of three layers: two exterior layers softer and a rigid inner core. This ensures first class print results, especially in high-end graphic industry.
$1.73
Inkjet Film & Ink
- 100-Sheets in Each Box
- Compatible with Dye-Based Inks
- Water-Resistant
- High Quality Positive
- Excellent Density & Clarity — DMAX up to 4.0, DMIN .12
- Fast drying
$45.00
Dye Black Film Inks are formulated with UV blocking inhibitors specially designed for EPSON®, Roland®, Mimaki® and Mutoh® desktop and wide format inkjet film printers, providing excellent results producing inkjet film positives and negatives.
• Our Silk Screen Black Film Inks are available in Dye, with Dmax values ranging from 2.8 to 5.0.
• Attain a high density image.
• Excellent UV resistance, thanks to our special UV blocking formula.
• Fast drying on high release film.
• Does no clog Printhead Nozzles.
• Formulated to work with all available desktop and wide format printers: EPSON®, Roland®, Mimaki® and Mutoh®.
• Reformulated to work with EPSON® DX-7 Printheads.
• We support the all Black Cartridge Systems.
• All Inks are filtered and degassed below 2 pm for exceptional stability.
• Works perfectly with your existing RIP Software and film.
• Our Silk Screen Black Film Inks are available in Dye, with Dmax values ranging from 2.8 to 5.0.
• Attain a high density image.
• Excellent UV resistance, thanks to our special UV blocking formula.
• Fast drying on high release film.
• Does no clog Printhead Nozzles.
• Formulated to work with all available desktop and wide format printers: EPSON®, Roland®, Mimaki® and Mutoh®.
• Reformulated to work with EPSON® DX-7 Printheads.
• We support the all Black Cartridge Systems.
• All Inks are filtered and degassed below 2 pm for exceptional stability.
• Works perfectly with your existing RIP Software and film.
$245.00
- Compatible with Dye-Based Inks
- Water-Resistant
- High Quality Positive
- Excellent Density & Clarity — DMAX up to 4.0, DMIN .12
- Fast drying
$150.00
100-Sheets in Each Box
Compatible with Dye-Based Inks
Water-Resistant
High Quality Positive
Excellent Density & Clarity — DMAX up to 4.0, DMIN .12
Fast drying
Compatible with Dye-Based Inks
Water-Resistant
High Quality Positive
Excellent Density & Clarity — DMAX up to 4.0, DMIN .12
Fast drying
$135.00